GigaPan Epic 100 + GF1 remote shutter mod.

Posted on 14/03/2012 by terenceang

I made a GigaPan EPIC 100 remote cable for Panasonic GF1, this adapter should also work for other Panasonic camera with 2.5mm connector.

EPIC 100 Trigger

Here is the schematic.

Assembled cables will be available for US$19.90 (estimate), for those that are not interested in DIY.

6 thoughts on “GigaPan Epic 100 + GF1 remote shutter mod.”

terenceang on 15/03/2012 at 12:53 am said:

http://forum.getdpi.com/forum/4-3rds-cameras/28095-pany-shutter-cable.html

Reply ↓
- YC Ong on 18/03/2012 at 10:45 pm said:
  
  Interested to get the above epic 100 trigger for lumix from you
  
  Advise how… Me from Singapore also
  
  Thanks
  
  Reply ↓
Mosley hardy on 07/07/2012 at 6:45 am said:

I’m interested in a cable too.

If you aren’t planning on making them after all, I have a question regarding the schematic – what type of component is the one marked “330R” on the schematic?

If it’s a resistor, is it 330ohm as in the schematic, or a 3K3 (it says 3300 on it)?

Thanks

Reply ↓
- Mosley hardy on 07/07/2012 at 6:53 am said:
  
  One more question – I’m not sure I follow RIGHT PIN FROM FRONT. when looking at the front of the imager, are the pins 1-2-3 left to right, or 3-2-1?
  
  Reply ↓
YC Ong on 14/10/2012 at 9:28 pm said:

Hi

Contacted you sometimes back on try to get the pana shutter remote from you. How is it coming along?

Reply ↓
Hugo on 28/02/2013 at 11:14 am said:

Do you know something about the pinout of the “epic 100″ I need diy the oficial canon cable, from your diagram I get that you have 5V when trigger is on from 1 and 2 pins. Thanks

Reply ↓